 |
Overview:
This project will show you how to replace window screens. Sagging and torn window screens can make your whole house look run-down. Freshen up the appearance of your home with only a minimal time investment and a few simple tools. Doing this with a friend, who can help hold the screen taut, makes the job go even faster.
Materials:
screen, screen splines (the spline is the thin, narrow piece of wood, metal or plastic that fits into or onto the edges of the window and holds the screen taut)
Tools You'll Need:
6-in-1 interchangeable screwdriver, 1-1/4" putty knife, quick change utility knife
Before You Begin:
Clear a flat, firm surface for a workspace, remove screen windows.
Barbara's Tips:
When securing the spline into the window channel, about 6" and then pull lightly on the spline. This will stretch it so it's easier to push into the channel.
 |
|
Step 1: Out with the Old
Use a flat screwdriver or putty knife to pry out the old spline. Remove the screen and clean out the channel.
Step 2: In with the New
Cut a new piece of screen. It should be 2" larger than the opening on all sides. Use the screening tool's convex wheel to push the screen into the channel on one side. Repeat on the other three sides, keeping screen smooth and taut. Cut a piece of the spline 6" longer than the perimeter of the opening. Begin at the top of the window and use the concave wheel on the screening tool to push the spline into the channel on top of the screen. Continue all the way around the opening, maintaining tension on the screen as you push the spline tightly into the channel, securing the screening to the frame.
Step 3: Easy, Breezy
Use your utility knife to cut any excess screen from outside the spline. Replace windows and enjoy the new view. You did it yourself!
|
|
