 |
Overview:
This project will show you how to hang a wreath on a wood door. A wreath hanging on a front door adds character to a home.
Materials:
picture hooks, hanging wire, tape
Tools You'll Need:
10ft. or 25ft. tape measure, 7oz. or 16oz. hammer
Barbara's Tips:
Wreaths can be changed seasonally to reflect the changing seasons.
 |
|
Step 1: Location is Everything
Hold the wreath up to the door to determine the desirable location. Usually, the center of the door and approximately six feet from the floor is a good spot.
Step 2: Basic Math
Measure the width of the door and divide by two. This is the center of the door. Mark this spot with a pencil.
Step 3: Measure Up
Next, measure up from the bottom of the door to the desired height. Mark this spot with a pencil.
Step 4: X Marks the Spot
The point where these two marks intersect is the point where you will drive the nail for hanging the wreath. Using a hammer, secure the nail and hook into the door.
Step 5: Get Wired
Using hanging wire, create a loop on the back of the wreath. Finally, hang this loop over the hook on your door.
|
|
